Infinity Chinese Miracle-2 MTK V2.00-r3 Latest Setup Download

Main

DownloadAgent version 1816 supported and tested on all supported SoC.

Fixed some memory leaks

Connection level revised

- MemoryTool

Fixed multi-selection

GPT init revised

Preloader init revised

- Service

Repair Security revised. Fixed issues with some Meizu and other models.

Core 

Optimized different agents versions support ( DA16xx line ) 

EMIDB updated

Hint/Error explain module updated

Activated SymLinks - allow reduce boot base size by redirecting diffirent brand/models if they have same base

BootHelper ( stage 1 of 3 ) activated - hints/explanation of boot sequnce and correct file selection

MT6758 support under test

MT6771 support under test

MT6765 support under test

 Flasher

Show Preloader HW compatibility when load firmware in flash tab

Fixed file selection order - if SW package contain mixed types - secure will be selected by default

FW reader 

New types of firmwares supported

Scatter creation optimized for some SoC

 New models included

Limited Alcatel support 

Limited Gionee support

Limited Wiko support

Limited Tecno support

And diffirent other models

Some other basic "generic" secure devices support optimized

NAND devices on MT6570 moved to separate mode ( under base ) - FACTORY for ONLY FACTORY-provided FW flashing, INFINITY - for all rest operations

Known issues/warnings/info :

A. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!

In result you will give read/write FW errors and rest problems at all.

Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write

B. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!

C. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.

Read-Write data, which you want, ignore "EMPTY" states.

D. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing

E. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.

E. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!

F. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!

G. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!

If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!

Preloader info shown now during FW load.

Credits :

gracy_elec - different useful files contribution

kamal_singla - testing and useful files contribution 

merujeffrey - useful files contribution and report logs

Download Link :: Link :: APK